When harvesteing ley there is always mechanical losses from the harvest machines. During the last years the roundbalers with knives,cutting the material-are more common, This use increase the mechanical losses of material. MATERIALS AND METHODS The roundbaler which used in this test was a Krone Vario Pack 1500 Multi Cut. This roundbaler has 17 knives. The theoretical length of cut was 64 mm. During the test we stretched a rubber tarp under the balechamber and collected the materials which fell down from the balechamber.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

With a new digital world that runs parallel with our physical one, we are also facing a new type of architecture and new materials that this new architecture is built on. In this thesis I examine pixels and vectors, two of the digital materials used to create pictures. By approaching them as digital materials, I have mapped their different qualities, when and where one or the other is more or less applicable and the reason behind it. My main research question asked was the following: Are the (digital) materials challenged outside their primary fields of application, and in that case, in which way? With this question in mind, I carried out a semiotic picture analysis on four pictures, later on dividing them into four different categories, based on their different qualities and their ability to deliver information.

The purpose of this study is to examine two educational materials from different decades, to see if they have a conscious gender and equality perspective, and to see if they have followed the development society made regarding gender and equality. Even the curricula have a part in my study as I will relate them to the educational materials. Equality as a concept means briefly that women and men should have the same conditions, and gender depicts our notions of femininity and masculinity.I have chosen to do textual analyses, focusing on multimodal discourse because I analyze both text and image. I also use both quantitative and qualitative methods.My questions are: In which way do the curricula and the educational materials express equality?; In which way do the curricula and the educational materials express gender?; Do the educational materials express the fundamental values written about equality and gender in the curricula? And, if this is the case, does it mean that educational materials have followed the development of the Swedish society?The conclusion of this work is that equality and gender are presented as goals in both curricula, but the new curricula have developed that section more.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

The following essay aims to determine what textbooks and teaching media educators in the county of Västerbotten use when teaching the relation between religion and science. Based on educational science theory and through analyzes of factual texts, the teaching materials was examined to determine how much focus they put on the thematic of religion and science. The result shows how the different teaching materials affect this thematic differently. The main conclusion is therefore that students in Sweden could, depending on the teaching materials used in their education, be taught by different standards to reach the same requirements..

The purpose of this work is to investigate how 4-5 year olds perceptions of materials and material properties can be developed through an educational activity. The study is based on two interviews with eight children in that age category. The interviews were conducted before and after an activity where the children were first introduced to the subject by the tale of The three little pigs (Harris, 2009) and then given the opportunity to explore various materials related to the book. The kids got to experiment and explore how water affected materials and to compare different materials properties. The children were also attracted to build and create the material that was offered during the activity.

The actual project presents the development of a testing rig for a steam engine. A short overviewabout the development of steam engines is presented, until arriving to the development of thepresent engine, which will require to be tested in different ways.The testing rig studied on this project (based on a Lanchester engine) will be used to testdifferent materials and layouts for the group Piston-Cylinder.The engine is a high performance steam power engine, which is going to have a highpower/dimensions ratio, what will lead to require high performance components and materials.An introduction to the testing rig is presented, and the entire design project is done in order toreplace the disappeared documentation of the current testing rig, built on the 1970?s. Also somemodifications done in the original testing rig are presented, as well as some detected problemsand their possible solutions..

Introduction: Dolomite AB was in need of a dummy arm for crutch testing, to complement their existing test capabilities. Background: A large number of people need crutches on a daily basis. For them it is essential that their crutches do not fail. ISO (the International Organization for Standardization) conducts ongoing work to guarantee the durability and function of e.g. crutches.

The number of people of getting allergic symptoms is increasing and the reasons are considered to be many. The human have changed their habits and spend more time indoor. In combination with new building technologies where denser housing constructions and new materials this causes bad indoor climate contributes to a higher occurrence of allergiesThere are several courses of action to deal with this problem. One action is by choosing allergy-free interior surface materials. An allergy-free material emits low concentrations of harmful substances resulting in a great indoor air quality.

The purpose of this study is to provide a description of how mathematics teachers in grades 3 choose to work with mathematics and how it affects of student performance in national tests. The categories I will use are outdoor education, textbooks, learning materials and problem solving. Laboratory materials can be everyday materials and educational materials in which pupils have an abstract understanding of the subject. This survey was conducted through interviews and observations. The survey was also conducted in relation to student performance in national math tests.

Test is an area in system development. Test can be performed manually or automated. Test activities can be supported by Word documents and Excel sheets for documenting and executing test cases and as well for follow up, but there are also new test tools designed to support and facilitate the testing process and the activities of the test. This study has described manual test and identified strengths and weaknesses of manual testing with a testing tool called Microsoft Test Manager (MTM) and of manual testing using test cases and test log templates developed by the testers at Sogeti. The result that emerged from the problem and strength analysis and the analysis of literature studies and firsthand experiences (in terms of creating, documenting and executing test cases) addresses the issue of the following weaknesses and strengths.